70 and 75 dust cap spanner

[Guy Gregory]

I recently had made a spanner to fit the dust caps on the bolt on wire wheels as fitted to the early 2.3 L Talbot 70 and 75 as per attached photo. The minimum run gave me 3 more than I and others in Australia need, so if anyone is in need of such I have them. They are laser cut in 8 mm high strength aluminium alloy and need a little hand fettling with a file. The octagon is a nominal 56.5 mm A/F to allow for fettling. The cost is AU$25 each plus P&P.




John Shellard - John@shellard.com.au

[Dudley Smith]

The Dynostart on my AV105 is becoming increasingly sluggish. Despite two fairly new and well-charged batteries, it failed this morning to turn the engine...