Tweet
See below for patterns and tools held
| Model | Part | Owner | Location | Reference |
| 105/110 | cylinder head - iron | Gareth Burnett | Pace Products | |
| 105/110 | cylinder block - iron | Gareth Burnett | Pace Products | |
| 105/110 | sumps | Gareth Burnett | Pace Products | |
| 105/110 | oil pump - uprated | Gareth Burnett | Pace Products | |
| ? | windscreen pillars | Wavell Urry | Wavell Urry | |
| all | eared spinners | STD | GG | |
| all | T bolts | STD | GG | |
| 10/23 | water pump impellors | STD | GG | |
| 14/45 | rockers | STD | GG | |
| 75 | rockers | STD | GG | |
| all | jig for tightening castellated nut on half shafts | Hugh Mayes | Hugh Mayes | |
| 75 | BD exhaust manifold | TOC | New Store | |
| 95, 105 | Tap for threads in 105 exhaust flange | Wavell Urry | New Store | Jig 1 |
| 14-45 | Tap for threaded core plugs 18mm diameter | Michael Marshall | New Store | Jig 2 |
| 14-45 | Cam gear bolt | Michael Marshall | New Store | Jig 3 |
| 14-45 | Pinion ring key | Michael Marshall | New Store | Jig 4 |
| 14-45 | Oil pump refacing spindle | Michael Marshall | New Store | Jig 5 |
| 14-45 | Steering column bearing nut | Michael Marshall | New Store | Jig 6 |
| 14-45 | Crankshaft damper bolt key | Michael Marshall | New Store | Jig 7 |
| 14-45 | Jig to align teeth and keyway in cam gear | Michael Marshall | New Store | Jig 8 |
| 14-45 | Cam key (to check cam profile?) | Michael Marshall | New Store | Jig 9 |
| 14-45 | Clutch spring adjusting tool | Michael Marshall | New Store | Jig 10 |
| 75, 105 | Cut out water pump for setting gasket thickness | Ian Potts | David Brown | Jig 11 |